Hendrickson відкликає 14,238 STEERTEK NXT steer axles: що перевірити carriers
Hendrickson Recalls 14,238 STEERTEK NXT Steer Axles: What Carriers Should Check
NHTSA recall 26E078 охоплює 14,238 потенційно залучених STEERTEK NXT front steer axle assemblies, виготовлених 16 січня — 10 грудня 2025 року. Неправильно обтиснений Huck collar може дозволити pin послабитися або вийти, спричинити рух axle seat чи debris на дорозі. Vehicle manufacturer і axle serial records визначають, чи належить конкретний truck до recall.
17 листопада 2026 · CDL UA News DeskПрактика: повторіть steering, suspension і front-axle checks у повному pre-trip inspection →
Що саме відкликають
Hendrickson USA подала NHTSA equipment recall 26E078 для 14,238 потенційно залучених STEERTEK NXT front steer axle assemblies з nominal ratings 10K, 12.5K та 13.2K pounds, виготовлених від 16 січня до 10 грудня 2025 року. Це equipment population, а не кількість trucks із підтвердженим defect. Part 573 report називає серед покупців equipment Kenworth, Peterbilt, International та Blue Bird, але сама назва truck brand або model не доводить, що конкретний VIN чи axle входить до campaign.
У чому defect і чому він важливий
Кожен affected assembly має axle seats, press-fitted на fabricated axle beam і закріплені Huck fasteners. За filing, один або більше collars могли бути неправильно swaged на mating pins. Collar або pin може послабитися; pin може вийти, дозволити relative movement між axle seat і beam або стати foreign-object debris на проїзній частині, підвищуючи crash та injury risk. На момент filing Hendrickson не повідомляла про warranty claims, end-user complaints, crashes чи injuries, пов’язані з цією проблемою.
Які warning signs називає manufacturer filing
Part 573 report вказує, що loose або missing Huck collars чи pins можуть супроводжуватися rattling noise з steer axle assembly під час руху. Missing hardware або relative movement axle seat на beam можуть бути visible під час routine pre-trip. Це не означає, що driver має сам визначати recall scope або виконувати repair. Якщо є шум, looseness, missing hardware чи незвичний movement, припиніть звичайний dispatch, повідомте carrier або maintenance письмово та дотримуйтеся їхніх safety instructions.
Як визначити, чи входить конкретний truck
Не покладайтеся лише на model name, фотографію або приблизний build date. Fleet чи owner-operator має зібрати VIN, vehicle make/model, build information, axle model та serial number із service records або axle identification, а потім звернутися до vehicle manufacturer чи Hendrickson. NHTSA VIN search корисний, але agency попереджає, що він може ще не показувати деякі newly announced recalls, доки не визначені всі VIN. Campaign number для звернення — HTRUCK 2026-01; Hendrickson customer service: 1-630-910-2800 або 1-855-743-3733.
Inspection і безкоштовний remedy
Hendrickson планувала повідомити affected vehicle manufacturers до 16 листопада, надавши їм відповідні axle serial numbers. Filing рекомендує inspection чотирьох Huck fasteners на кожному potential axle за Hendrickson instructions. Якщо collar або pin missing чи loose, Hendrickson має надати replacement axle безкоштовно та, за умовами filing, applicable standard labor allocation для inspection і installation. Не використовуйте цю статтю як repair procedure і не працюйте під truck без approved lifting/support equipment та qualified maintenance process.
Що робити carrier або owner-operator зараз
Перевірте asset list для trucks, які могли отримати STEERTEK NXT axles у зазначений production period; надішліть VIN та axle serial information до OEM або Hendrickson; збережіть відповідь, inspection work order і remedy record. До підтвердження scope не позначайте весь fleet як recalled і не вважайте відсутність VIN result остаточною. NHTSA filing не містить blanket “do not drive” або “park outside” advisory, але це не скасовує обов’язку виконати manufacturer instructions і не експлуатувати vehicle, яке maintenance authority або law-enforcement officer визнав unsafe чи out of service.
Практичне значення для українських та immigrant drivers
Recall застосовується до equipment, а не до nationality, accent, visa, parole, TPS, EAD або виду CDL. Він не змінює non-domiciled CDL eligibility, medical certification чи work authorization. Українському або immigrant driver варто повідомляти defect concern через carrier safety channel, зберігати photo або written defect report без спроб самостійного ремонту та просити зрозумілі instructions. Якщо employer змушує керувати vehicle всупереч documented out-of-service або repair instruction, зберігайте dispatch messages і звертайтеся до відповідного safety authority або qualified counsel.
Інформаційне застереження
Матеріал опубліковано 17 листопада 2026 року на основі NHTSA recall record, Part 573 filing, DOT data та manufacturer information. Recall scope, VIN lists, inspection instructions і remedy status можуть оновлюватися. Це general safety information, а не repair, legal, immigration або employment advice. Для рішення щодо конкретного truck використовуйте current NHTSA record, vehicle manufacturer notice, Hendrickson instructions і qualified technician.
What is being recalled
Hendrickson USA filed NHTSA equipment recall 26E078 for 14,238 potentially involved STEERTEK NXT front steer axle assemblies with nominal ratings of 10K, 12.5K and 13.2K pounds, manufactured from January 16 through December 10, 2025. That is an equipment population, not a count of trucks with a confirmed defect. The Part 573 report identifies Kenworth, Peterbilt, International and Blue Bird as equipment purchasers, but a truck brand or model name alone does not establish that a particular VIN or axle is included in the campaign.
The defect and why it matters
Each affected assembly has axle seats press-fitted to the fabricated axle beam and secured by Huck fasteners. According to the filing, one or more collars may not have been properly swaged onto the mating pins. A collar or pin can loosen; a pin may work out, allow relative movement between the axle seat and beam, or become foreign-object debris on the roadway, increasing crash and injury risk. At the time of the filing, Hendrickson reported no warranty claims, end-user complaints, crashes or injuries associated with the issue.
Warning signs identified in the manufacturer filing
The Part 573 report says loose or missing Huck collars or pins may be accompanied by a rattling noise from the steer axle assembly while the vehicle is operating. Missing hardware or relative movement of the axle seat on the beam may be visible during a routine pre-trip inspection. That does not make recall identification or repair a driver task. If there is noise, looseness, missing hardware or unusual movement, stop normal dispatch, report it to the carrier or maintenance team in writing, and follow their safety instructions.
How to determine whether a specific truck is included
Do not rely only on a model name, photograph or approximate build date. A fleet or owner-operator should collect the VIN, vehicle make and model, build information, axle model and serial number from service records or axle identification, then contact the vehicle manufacturer or Hendrickson. NHTSA VIN search is useful, but the agency warns that some newly announced recalls may not appear until all VINs have been identified. The campaign number to reference is HTRUCK 2026-01; Hendrickson customer service is 1-630-910-2800 or 1-855-743-3733.
Inspection and the free remedy
Hendrickson planned to notify affected vehicle manufacturers by November 16 and provide the relevant axle serial numbers. The filing recommends inspection of the four Huck fasteners on each potential axle under Hendrickson instructions. If a collar or pin is missing or loose, Hendrickson is to provide a replacement axle free of charge and, under the filing, the applicable standard labor allocation for inspection and installation. Do not use this article as a repair procedure or work beneath a truck without approved lifting and support equipment and a qualified maintenance process.
What a carrier or owner-operator should do now
Review the asset list for trucks that may have received STEERTEK NXT axles during the stated production period; send VIN and axle-serial information to the OEM or Hendrickson; and retain the response, inspection work order and remedy record. Until the scope is confirmed, do not label the whole fleet recalled and do not treat an absent VIN result as final. The NHTSA filing does not contain a blanket “do not drive” or “park outside” advisory, but that does not cancel the obligation to follow manufacturer instructions or to keep out of service any vehicle a maintenance authority or law-enforcement officer has determined is unsafe or out of service.
Practical implications for Ukrainian and immigrant drivers
The recall applies to equipment, not nationality, accent, visa, parole, TPS, EAD or CDL type. It does not change non-domiciled CDL eligibility, medical certification or work authorization. A Ukrainian or immigrant driver should report a defect concern through the carrier safety channel, preserve a photo or written defect report without attempting a repair, and request clear instructions. If an employer pressures a driver to operate contrary to a documented out-of-service or repair instruction, preserve dispatch messages and contact the appropriate safety authority or qualified counsel.
Informational disclaimer
This article was published November 17, 2026 based on the NHTSA recall record, Part 573 filing, DOT data and manufacturer information. Recall scope, VIN lists, inspection instructions and remedy status may be updated. This is general safety information, not repair, legal, immigration or employment advice. Decisions about a specific truck should rely on the current NHTSA record, the vehicle manufacturer notice, Hendrickson instructions and a qualified technician.
NHTSA — recall lookup for campaign 26E078000 ↗
NHTSA — Part 573 Safety Recall Report 26E078 ↗
U.S. Department of Transportation Data Portal — Recalls Data ↗
Hendrickson — STEERTEK NXT product reference ↗
CDL Test Prep Tracker — independent trucking-safety report, November 15, 2026 ↗